Divider 120mm without stop, length 285 - 485 mm
OPT-AVD120B+ 0285 le0485
Suitable for a variety of products in larger packages or those that you put in two rows on top of each other on the shelf.
Recommended for:
- soft packs in the household and cosmetics department;
- crisps and other larger packaging;
- sausages in relay or other irregular vacuum packs. In this case, combine with a clear front stop that will keep products from falling out without limiting visibility.
The length can be adapted from 285mm to 485 in 25mm increments.
The dividers can be kit packed with fixing rails. Depending on the shelf choose fixing rails with magnet or adhesive.
If the products are in unstable packaging and there is a need for fall prevention, you can equip with a front safety stop instead of a front fixing rail. Available with different brow heights.
Colour: Crystal clear
Packaging:
- 24 pcs in a stack
- 96 pcs in a box
You can see how the shelf stacking system works here.
When ordering the equipment there is a short description for assembling the system on the shelf in your store.
L-stop 120 mm Shelf Divider, length 285 - 485 mm
OPT-AVD120BL+ 0285 le0485
The divider is part of the equipment system of:
- products in larger packages - multipack crisps, muesli, etc.;
- products in unstable packaging in the household and cosmetics category;
- packaging that you stack in two rows on top of each other on the shelf;
- vacuum-packed cold meats. In this case, combine with a spring-loaded pusher or a system with back support.
This will ensure self-loading to the top of the shelf and excellent visibility even with reduced shelf availability at the end of the working day.
The presence of a partial L-stop conveys shelf tidiness and puts an excellent face on the product portfolio. Complete with partial T-stop dividers and used for both ends of the shelf.
Order 2 shelf dividers and receive 1 left and 1 right divider.
You can adapt its length from 285 to 485mm in 25mm increments.
The dividers can be kit packed with fixing rails. Depending on the shelf choose fixing rails with magnet or adhesive.
Colour: Crystal clear
Packaging:
- 20 pcs per stack
- 80 pcs per box
You can see how the shelf stacking system works here.
T-stop 120 mm Shelf Divider, length 285 - 485 mm
OPT-AVD120BT+ 0285 le0485
The divider is part of the equipment system of:
- products in larger packages - multipack crisps, muesli, etc.;
- products in unstable packaging in the household and cosmetics category;
- packaging that you stack in two rows on top of each other on the shelf;
- vacuum-packed cold meats. In this case, combine with a spring-loaded pusher or a system with back support.
This will ensure self-loading to the top of the shelf and excellent visibility even with reduced shelf availability at the end of the working day.
The presence of a partial board conveys shelf tidiness and forms an excellent face for the product portfolio.
You can adapt its length from 285 to 485mm in 25mm increments.
The dividers can be kit packed with fixing rails. Depending on the shelf choose fixing rails with magnet or adhesive.
Colour: Crystal clear
Packaging:
- 16 pcs per stack
- 64 pcs per box
You can see how the shelf stacking system works here.
When ordering the equipment there is a short description for assembling the system on the shelf in your store.
Divider 120 mm; tall T-stop; length 185-385 mm
OPT-AVD120BT12+ 0185 le0385
The divider is part of the equipment system of:
- products in unstable packaging in the household and cosmetics category;
- packages that you stack in two rows on top of each other on the shelf - toothpastes (horizontally stacked);
- chocolates.
With horizontal shelving, you can combine with a back support system to provide excellent visibility even with reduced shelf availability, and to stack and restock quickly and conveniently. You should allow for more inter-shelf space.
These dividers are also very handy when stacked on shelves at an incline. In this case, it is necessary to complete with fixing rails with strong mounting adhesive tape.
There is a T-stop that prevents the products from falling.
The presence of a partial board conveys shelf tidiness and forms an excellent face for the product portfolio.
You can adjust its length from 185 to 385mm via a 25mm increment.
The dividers can be kit packed with fixing rails. Depending on the shelf choose fixing rails with magnet or adhesive.
Colour: Crystal clear
Packaging:
- 16 pcs per stack
- 64 pcs per box
You can see how the shelf stacking system works here.
When ordering the equipment there is a short description for assembling the system on the shelf in your store.
Front rail; with magnet; 998 mm
OPH taTM25 le0998
Used for mounting dividers on metal horizontal shelves 100 cm long.
Must be placed at the top of the shelf.
This way you can easily make swaps when changing the plan-o-gram in the store or when cleaning the shelves thoroughly.
Not recommended for shelves at an incline. In these cases, use a front rail with mounting tape.
Standard colour: transparent
Packaging: 50 pcs. per carton
Front rail with magnet; 1248 mm
OPH taTM25 le1248
Used for mounting dividers on metal horizontal shelves 125 cm long.
Must be placed at the top of the shelf.
This way you can easily make swaps when changing the plan-o-gram in the store or when cleaning the shelves thoroughly.
Not recommended for shelves at an incline. In these cases, use a front rail with mounting tape.
Standard colour: transparent
Packaging: 50 pcs. per carton
Back rail with mounting adhesive, 1248 mm
OBR+ taTF19 le1248
Back rail for attaching dividers with adhesive. Suitable for metal, glass or chipboard shelves.
To be mounted at the back of the shelf.
Suitable for refrigerated environments.
Standard colour: transparent
Packaging: 50 pieces per carton
Back rail with magnet for standard metal shelves; 998 mm
OBR+ taTM25 le0998
Back rail for attaching dividers with magnet. Suitable for standard metal shelves.
To be mounted at the back of the shelf.
Also recommended for use in refrigerated environments.
Standard colour: transparent
Packaging: 50 pieces per carton
Back rail with magnet for standard metal shelves; 1248 mm
OBR+ taTM25 le1248
Rear rail for attaching dividers with magnet. Suitable for standard 125cm long metal shelves.
To be mounted at the back of the shelf.
Also recommended for use in refrigerated environments.
Standard colour: transparent
Packaging: 50 pieces per carton
Front board 60 mm with fixing rail; double magnet; 1248 mm
OFRK60 taTTM25 le1240
This board protects the goods from falling. It has a built-in rail for fixing the dividers. The front is 60mm high, it is crystal clear and does not obstruct the visibility of the goods.
Used alone or kit packed with different height dividers and rear fixing bar.
We recommend it for lower merchandise including cosmetics on glass shelves.