Magnetic back support
GBRN
90x135mm back support with magnetic base.
Suitable for supporting unstable packaging.
We recommend to use with divider system.
It is also possible to place it independently and use it without dividers.
We recommend using it behind large boxes of sweets or other packaging that does not fill to the bottom of the shelf. You can lean just a few packs on this back.
colour: crystal clear
Packaging:
- 5 pcs per stack
- 50 pcs. per carton
Back support plate, large
OPRL - pull system detail
The back is part of the pull-tab support system.
This system is suitable for unstable flat packages for larger or heavier products.
Recommended for:
- open refrigerated display for vacuum packed sliced cold meats or packs of frankfurters, sausage, etc.
- chocolates that you want to stack on top of the shelf without maintaining a large shelf stock.
Must be kit packed with base tape and pull tape.
The system is suitable for unsustainable flat packs.
The length of the main and pull strips should match the depth of your shelf.
To equip the refrigerated display case you should allow 10 faces per shelf with a standard length of 125cm.
Colour: crystal clear
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Small back support - pull system detail
OPRS - pull system detail
The back is part of the pull-tab support system.
This system is suitable for unstable flat packs for smaller and lighter products.
We recommend it for:
- open refrigerated display case for vacuum packed sliced products with smaller dimensions;
- spices, starches, dry soups, fixings;
- to stack on top of shelf without maintaining large shelf stock.
Must be kit packed with base tape and pull tape.
The system is suitable for unstable flat packs.
The length of the main and pull strips should match the depth of your shelf.
Colour: crystal clear
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Tape - pull system detail; 485mm
OPRL-PIN-0485-0488
Pull strip - 485mm long, suitable for shelves 500mm deep.
You can kit pack:
- small or large main bar;
- small or large back support;
The system is suitable for unstable flat packs.
- Sliced products, sausages and others in the refrigerated display case, chocolates - choose large back and main bar.
- Flat packed cheeses and round packs in the refrigerated display case, condiments, fixings etc. - choose a small back and a small base band.
Packaging:
- 20 pcs per stack
- 200 pcs. per carton
Small base - pull system detail
OPSS -0285-0485
Pull system detail
You can adjust its length for shelves from 300 to 500 mm deep through 50 mm increments.
The main bar is part of the support system. Must be kit packed with a small back support and a pull strip.
The system is suitable for non-resistant flat packs - starches, dry soups, condiments, fixings and products in flat packs.
The length of the backing and pull strips should match your shelf depth.
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Spring-loaded pusher 6N; length 285-485 mm
OP50SB+-6-0285-0485/460
Spring-loaded pusher with 6N spring force and adjustable length, suitable for shelves with depth of 300 - 500 mm.
The pusher has a reinforced front part that fixes it to the front rail. This ensures greater strength and durability of the equipment.
These pushers are suitable for medium heavy unstable packaging such as sliced cold meats, chocolates etc.
Kit pack with 60mm or 120mm tall dividers (depending on pack size) with front T and L stop and fixing rails.
Packaging: 20 piece stack
Spring-loaded pusher 9N; length 285-485 mm
OP50SB+-9-0285-0485/460
Spring-loaded pusher with 9N spring force and adjustable length, suitable for shelves with a depth of 300 - 500 mm.
These pushers are suitable for heavier unstable packaging such as chocolates, sausages, etc.
Kit pack omplete with 60mm or 120mm high dividers (depending on the size of the products) with front T and L stop and fixing rails.
Colour: pale grey
Packaging: 20 pcs. per stack
Divider 120 mm; tall L-stop; length 185-385 mm
OPT-AVD120BL12+ 0185 le0385
The divider is part of the equipment system of:
- products in unstable packaging in the household and cosmetics category;
- packages that you stack in two rows on top of each other on the shelf - toothpastes (horizontally stacked);
- chocolates.
With horizontal shelving, you can combine with a back support system to provide excellent visibility even with reduced shelf availability, and to stack and restock quickly and conveniently. You should allow for more inter-shelf space.
These dividers are also very handy when stacked on shelves at an incline. In this case, it is necessary to complete with fixing rails with strong mounting adhesive tape.
There is a L-stop that prevents the products from falling.
Combine with a 120mm spacer; tall L-board; length 185-385mm.
You order 2 pieces per shelf and get 1 left and 1 right for each shelf end.
The presence of a partial board conveys shelf tidiness and forms an excellent face for the product portfolio
You can adjust its length from 185 to 385mm via a 25mm increment.
The dividers can be kit packed with fixing rails. Depending on the shelf choose fixing rails with magnet or adhesive.
Colour: Crystal clear
Packaging:
- 20 pcs per stack
- 80 pcs per box
You can see how the shelf stacking system works here.
Narrow-back spring-loaded pusher; 6N; length 285-485 mm
OP25B+-6-0285-0485
Spring-loaded pusher:
- spring force 6N
- adjustable length, suitable for shelves with depth 300 - 500 mm
- narrow back with 25mm width
The pusher has a reinforced front part that fixes it to the front rail. This ensures greater strength and durability of the equipment.
These pushers are suitable for products with narrow faces such as toothpastes etc.
Kit pack with 60mm high dividers with front T and L stop and fixing rails.
Colour: pale grey
Packaging: 20 pcs. per stack
Tray for baby food jars 500 mm
OPT-TRAY-BF62-0500
Suitable for shelves 50cm deep.
If your shelves are a different size, please send an enquiry so we can offer you a suitable length.
Trays are fixed on 2 rails with double mounting adhesive.
We recommend a slight tilt of the shelves to ensure products are self-loading towards the front of the shelf.
For a shelf with a width of 125 cm you should provide 19 trays.
For a shelf with a width of 100 cm you should provide 15 trays.
Our experience with this equipment shows that it is
- extremely robust and hard-wearing;
- sets the planogram, prevents mixing of faces and ensures consistency between product and price tag;
- product loading is fast.
Color: crystal clear
Quantity per carton: 32 pcs