Magnetic back support
GBRN
90x135mm back support with magnetic base.
Suitable for supporting unstable packaging.
We recommend to use with divider system.
It is also possible to place it independently and use it without dividers.
We recommend using it behind large boxes of sweets or other packaging that does not fill to the bottom of the shelf. You can lean just a few packs on this back.
colour: crystal clear
Packaging:
- 5 pcs per stack
- 50 pcs. per carton
Back support plate, large
OPRL - pull system detail
The back is part of the pull-tab support system.
This system is suitable for unstable flat packages for larger or heavier products.
Recommended for:
- open refrigerated display for vacuum packed sliced cold meats or packs of frankfurters, sausage, etc.
- chocolates that you want to stack on top of the shelf without maintaining a large shelf stock.
Must be kit packed with base tape and pull tape.
The system is suitable for unsustainable flat packs.
The length of the main and pull strips should match the depth of your shelf.
To equip the refrigerated display case you should allow 10 faces per shelf with a standard length of 125cm.
Colour: crystal clear
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Small back support - pull system detail
OPRS - pull system detail
The back is part of the pull-tab support system.
This system is suitable for unstable flat packs for smaller and lighter products.
We recommend it for:
- open refrigerated display case for vacuum packed sliced products with smaller dimensions;
- spices, starches, dry soups, fixings;
- to stack on top of shelf without maintaining large shelf stock.
Must be kit packed with base tape and pull tape.
The system is suitable for unstable flat packs.
The length of the main and pull strips should match the depth of your shelf.
Colour: crystal clear
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Tape - pull system detail; 485mm
OPRL-PIN-0485-0488
Pull strip - 485mm long, suitable for shelves 500mm deep.
You can kit pack:
- small or large main bar;
- small or large back support;
The system is suitable for unstable flat packs.
- Sliced products, sausages and others in the refrigerated display case, chocolates - choose large back and main bar.
- Flat packed cheeses and round packs in the refrigerated display case, condiments, fixings etc. - choose a small back and a small base band.
Packaging:
- 20 pcs per stack
- 200 pcs. per carton
Small base - pull system detail
OPSS -0285-0485
Pull system detail
You can adjust its length for shelves from 300 to 500 mm deep through 50 mm increments.
The main bar is part of the support system. Must be kit packed with a small back support and a pull strip.
The system is suitable for non-resistant flat packs - starches, dry soups, condiments, fixings and products in flat packs.
The length of the backing and pull strips should match your shelf depth.
Packaging:
- 20 pcs. per stack
- 200 pcs. per carton
Tape - pull system detail; 385mm
OPRL-PIN-0385-389
Pull strip - 385mm long, suitable for shelves 400mm deep.
You can kit pack:
- small or large main bar;
- small or large back support;
The system is suitable for unstable flat packs.
- Sliced products, sausages and others in the refrigerated display case, chocolates - choose large back and main bar.
- Flat packed cheeses and round packs in the refrigerated display case, condiments, fixings etc. - choose a small back and a small base band.
Packaging:
- 20 pcs per stack
- 200 pcs. per carton